Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Colton, CA
Gate installation in Colton typically starts around $1,800 for a basic driveway swing gate and runs past $7,500 for a custom sliding gate with full automation. What makes Colton jobs different is the split between the historic downtown streets and the 1950s-80s tracts east of the 215, where expansive clay soils quietly push posts out of plumb every wet winter. We’re gate-only specialists, which means every tool, part, and diagnostic habit we bring is built around one trade: gates. Call (844) 614-1023 for a free estimate.
Why Colton Homes Are Different
Colton’s older west side, around the downtown core in 92401, holds early-1900s through 1950s stucco homes with original wrought-iron fences and masonry pilasters. Those gates were often set into brick or mortar that is now a century old, so a sagging gate there is rarely just a hinge problem. It’s a footing problem. The post has moved, the mortar has crumbled, or the frame has rusted where it meets the masonry. Repairs on those streets mean re-anchoring steel into old brick without cracking it.
East of the 215, in the 92324 tracts, the picture changes. Those are 1950s-1980s slab-on-grade stucco homes with rear-alley chain-link and driveway swing gates. Many owners are now upgrading to vinyl or ornamental steel. Colton’s hot, dry Inland Empire summers bake vinyl panels until they warp, and Santa Ana wind events push unlatched gates against their stops hard enough to bend hardware. Summer highs frequently pass 100°F, and metal hinges and latch hardware expand, loosen, or seize. Winter rain saturates the expansive clay and heaves post footings out of alignment. The repair we do in 92324 in August is not the repair we do in 92401 in January.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Colton Services
Most Colton calls fall into two groups: the gate that no longer opens or closes dependably, and the electric system that stopped responding to remotes or keypads. Both are handled by the same gate-specialist team.
Gate Repair in Colton
Mechanical gate repair in Colton covers hinges, posts, track systems, latch hardware, and panel alignment. On the west side we often find rusted original iron hinges bleeding onto century-old stucco or masonry. East of the 215 the work is usually straightening posts that clay soil moved and re-hanging gates that drag on driveway slabs. We work on your brand, whatever it is. Gate Repair in Colton
Electric Gate Repair in Colton
Electric gate trouble in Colton usually traces to the opener, control board, safety sensors, or wiring. High heat shortens the life of control boards and power supplies parked outside. Santa Ana wind events trip safety edges and knock sensors out of alignment. We troubleshoot the whole circuit, not just the motor, and we carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Electric Gate Repair in Colton
Gate Installation in Colton
Gate installation in Colton starts with the ground under the posts. East of the 215, the expansive clay under 1950s-80s tract homes swells with winter rain and shrinks in summer heat, so footings must be sized and set to hold alignment through that movement. West of downtown, older lots often mean working around existing masonry pilasters and century-old property lines. The goal is a gate that works on day one and stays square through a Colton summer and wet winter.
We install the gate, the opener, the safety edges, and the wiring as one system, so the first service call years later doesn’t turn into a hunt for who did what. The Gate Installation service covers everything from a simple driveway swing gate to a fully automated commercial slide gate.
Driveway Gate Installation
Signs you need it
The current gate drags on the driveway, no longer latches, or your property needs controlled driveway access.
What it costs in Colton
A single driveway swing gate in Colton typically runs $1,800 to $3,400, and a double swing gate or ornamental steel design typically runs $3,500 to $6,000.
How we do it
We set the posts in properly sized footings, hang the gate, set the latch and stops, and adjust the hinges until the gate swings and latches without dragging.
Sliding Gate Installation
Signs you need it
The driveway slope or tight turnaround space makes a swing gate impractical, or you need a wider vehicle opening.
What it costs in Colton
A rolling or sliding gate in Colton typically starts around $2,200 and runs $3,600 to $6,800 with an automated operator.
How we do it
We lay the track or set the cantilever base, install the gate frame and panel, mount and wire the operator, then test the full travel with the safety devices.
Automatic Gate Installation
Signs you need it
You want to open the gate from the car or house without getting out, or you need controlled entry for a rental or commercial property.
What it costs in Colton
Adding an automatic opener to a new or existing gate in Colton typically runs $1,200 to $2,800 for the operator, plus $500 to $1,200 for wiring and safety edges.
How we do it
We mount the operator, run the power and low-voltage wiring, install safety edges and sensors, and program the remotes and keypads on site.
What Gate Installation Costs in Colton
| Item | Typical range in Colton |
|---|---|
| Single driveway swing gate | $1,800 – $3,400 |
| Double ornamental steel gate | $3,500 – $6,000 |
| Sliding gate with automation | $3,600 – $6,800 |
| Automatic opener added to gate | $1,200 – $2,800 |
| Safety edges and wiring | $500 – $1,200 |
How long does a gate installation take in Colton?
Most Colton driveway gate installations are done in one to three days. Custom sliding gates with automation can run longer if concrete has to cure. We’ll give you a written schedule and a fixed price before the work starts.
Do you pull permits for gate installation in Colton?
Many automated gates in Colton require a permit for the electrical and sometimes the structure. Ask the city building department for the current rules. We’ll handle the install and can coordinate with your city’s process, but the city sets the permit requirements.
Brands We Service in Colton
We work on LiftMaster, DoorKing, Elite, and Mighty Mule systems daily, plus the full list of nine major brands in our service profile. Because gate repair is our only trade, we stock common boards, sensors, and remotes rather than ordering everything. See our brands for the full list. That brand coverage usually means fewer second-opinion calls and shorter parts delays.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Colton, CA
| Service | Typical range in Colton |
|---|---|
| Gate repair | $150 – $450 |
| Electric gate repair | $250 – $650 |
| Single driveway swing gate installation | $1,800 – $3,400 |
| Double ornamental steel gate installation | $3,500 – $6,000 |
| Sliding gate installation with automation | $3,600 – $6,800 |
| Automatic opener installation | $1,200 – $2,800 |
| Safety edge and sensor installation | $500 – $1,200 |
| Hinge and latch hardware replacement | $150 – $400 |
What pushes price up in Colton is usually the ground. A post set in expansive clay needs a deeper, wider footing than one in stable soil. Masonry work on old west-side pilasters also adds scope. Whatever the job, the written estimate sets the final price before any work starts. Your gate is quoted and agreed first, never billed as a surprise later.
Neighborhoods We Serve in Colton
We cover every part of Colton, from the historic downtown streets of 92401 to the tract neighborhoods east of the 215 in 92324. Response time across Colton is usually faster than outlying mountain or desert calls because we route crews out of Moreno Valley. Call (844) 614-1023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Downtown Colton
- Terrace Village
- Reche Canyon
- Cooley Ranch
- La Loma Hills
Service Area – Cities Near Colton
Our gate repair and installation crews run throughout the Inland Empire. We regularly take calls from San Bernardino, CA, Highland, CA, Redlands, CA, and Rubidoux, CA, plus the Moreno Valley area where our shop is based. If you’re on the edge of Colton, call (844) 614-1023 and we’ll confirm dispatch.
Serving Colton, CA – Our Local Coverage Area
We serve Colton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Colton
Call (844) 614-1023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Most Colton calls can be scheduled same day or next morning, depending on when we hear from you.
Some Colton neighborhoods have HOA or design review rules for gate style and height. The city may also require a permit for an automated gate. Ask before the work starts. We’ll build to the written specs you get from your city or HOA.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers most budget residential systems and commercial-grade operators installed around Colton. We work on your existing brand rather than pushing you to switch.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Colton Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Daniela Ramirez"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Colleen Schaefer"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Neil Parker