Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in San Bernardino, CA
We repair, service, and install Ghost Controls gate openers across San Bernardino, from foothill driveways near the Cajon Pass to flat valley lots along busy corridors. We’re an independent service provider, not a factory affiliate, which means our loyalty is to your gate working correctly, not to a brand program. The Ghost Controls units we see here rarely fail from one single cause. Wind grit, heat stress, and posts that have been working loose for years usually combine.
Our team knows these openers because we work on them constantly. Ghost Controls builds DIY-friendly systems that are straightforward to install, but San Bernardino conditions test them in ways a coastal install never would. Call (844) 614-1023 for service anywhere in the city. We answer 24/7.
Why San Bernardino Residents Choose Us for Ghost Controls Service
Most gate companies know Ghost Controls as one line among many. We know it as a system that lives or dies by how well its posts were set, how much dust has packed into its track, and how many summers its control board has baked through. Gerardo Hendricks, our owner, spent well over a decade in the trade before starting Gate Repair Moreno Valley in 2015, and he built the company around a simple idea: diagnose the whole gate, not just the motor bolted to it.
That matters in San Bernardino. A Ghost Controls opener that seems dead often turns out to be a hinge post leaning three degrees off plumb, forcing the motor to fight its own gate on every cycle. We check that first. We’re gate-only specialists working across nine major brands including Ghost Controls, LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. The estimate is free, the price is set before work starts, and you never have to explain your gate’s history to a stranger. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in San Bernardino
- Operators straining against grit-packed tracks. Santa Ana winds blow desert dust into slide tracks and pivot points. The motor works harder, runs hotter, and eventually burns out or strips the drive gear. We clean the track, clear the pivot points, and check the motor’s current draw before it fails completely.
- Hinge posts loosened by years of gust loading. Wind-exposed streets near the foothills see gates acted on by repeated gust pressure that rocks posts in sun-baked, compacted soil. The gate sags, the opener can’t compensate, and you get stripped gears or bent swing arms. Our first move is re-anchoring and re-plumbing the posts.
- Cracked control boards from heat exposure. San Bernardino summers make plastic housings and wire insulation brittle. Control boards crack, short out, and fail intermittently. We replace them with quality parts that fit, and we route wiring so it isn’t baking against a metal housing.
- Battery backup and solar kits dying early. Dust coats solar panels and heat degrades batteries faster than the manufacturer’s average. A gate that works fine on AC power but won’t open during an outage usually has a dead battery and a panel producing a fraction of its rated output.
- Gates opening halfway and reversing. This is often an obstruction sensor misaligned by a sagging gate or a post that’s shifted. The opener reads resistance and reverses as a safety measure. We realign the gate, re-set the sensor, and the problem usually clears.
Ghost Controls Service in San Bernardino: What Local Conditions Mean for Your Equipment
The most common Ghost Controls failure we see on wind-exposed streets toward the foothills and near the Cajon Pass has nothing to do with the motor. Years of gust loading work the hinge posts loose in compacted, sun-baked soil. The gate sags, the leaves bind against the ground or the latch, and the opener strains against resistance it was never designed to fight. The motor burns out or the drive gear strips. A technician who only swaps the opener is treating the symptom. A technician who re-anchors and re-plumbs the posts before touching the operator is fixing the gate.
San Bernardino’s older housing stock makes this worse. Mid-century tract homes and early-1900s Craftsman bungalows often have original wrought-iron or chain-link gates on posts that were set shallow, long before anyone imagined a motor pulling on them. Block-wall and masonry perimeter fencing, common on corner lots, means re-setting a hinge means drilling into hardened concrete or masonry, not just digging a new hole. We’ve done enough of these to know what the soil, the wind, and the fence all contribute to the problem. Tell me what the gate is doing, or not doing, and we’ll figure out the rest from there.
Ghost Controls Models & Products We Service in San Bernardino
We work on the full Ghost Controls range, including Heavy-Duty Single Swing Gate Openers like the TSS1, Dual Swing Gate Openers like the TDS2, and Slide Gate Openers like the TSG1. We also service Solar Kits and Battery Backup accessories, which we see frequently on San Bernardino properties where running conduit to the gate isn’t practical.
For critical components like control boards, motors, and remote receivers, we use OEM Ghost Controls parts so everything connects and communicates the way it should. For gears, batteries, and hardware, we’re willing to source high-quality aftermarket options when they hold up better under San Bernardino heat and dust than the original spec part. The goal is a gate that stays working, not a parts invoice that matches a catalog. A cracked board on a TDS2 doesn’t mean you need a whole new opener. We’ll assess honestly whether a targeted repair makes sense or whether replacement is the smarter long-term investment.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in San Bernardino
Ghost Controls repair in San Bernardino is priced per job, not by a menu, because the actual work depends on what we find. A sensor realignment on a TSS1 runs less than a full post re-set with fresh concrete and a new control board. Here’s a rough sense of what typical jobs fall into:
- Basic troubleshooting and sensor alignment: generally the entry point, covering diagnosis, adjustments, and testing.
- Control board or receiver replacement: parts plus labor, with OEM Ghost Controls components for compatibility.
- Motor or drive gear replacement: higher because of parts cost and the labor of re-setting the operator to work smoothly.
- Post re-anchoring and gate realignment: varies with soil, existing concrete, and whether masonry work is involved.
The estimate is free. We look at the gate, check the posts, the track, the board, and the power feed, then give you a written price before any work begins. You approve it first. Call (844) 614-1023 for an exact quote.
Serving San Bernardino, CA – Our Local Coverage Area
We serve San Bernardino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in San Bernardino
A breaker that trips after a hot day usually points to a motor drawing more current than it should, often because heat has degraded the motor windings or because the gate itself is binding and forcing the motor to work against extra resistance. We’ll check the gate’s alignment first, then test the motor’s current draw and inspect the board for heat damage. Call (844) 614-1023 and we’ll diagnose it.
Yes, in most cases. Dust and grit pack into the motor housing and pivot points, but we can disassemble, clean, and lubricate the unit, then check whether the drive gear has been worn. If the motor has overheated to the point of winding damage, replacement may make more sense than repair, and we’ll tell you that plainly. Estimates are free at (844) 614-1023.
Halfway-and-reverse behavior almost always comes from an obstruction sensor misreading resistance. The gate may be sagging, a post may have shifted, or debris may be blocking the track. The opener reverses as a safety default. We realign the gate, clear the path, and re-set the sensor settings so the opener reads actual obstructions instead of its own binding hinge.
We do. Full afternoon sun in San Bernardino is actually good for solar output, but the panel needs to be angled and kept clean, since wind-blown dust cuts output quickly. We install the panel, check the battery, and make sure the charging system is matched to how often the gate cycles. Call (844) 614-1023 for a free on-site estimate.
Yes. Short range typically means a failing receiver, a damaged antenna wire, or interference from nearby metal, power lines, or other transmitters. We test the receiver sensitivity, check the antenna, and replace the receiver with an OEM Ghost Controls part if needed. It’s a common fix, and it usually restores full range. Call (844) 614-1023.
Service Areas Near San Bernardino
Our gate repair service covers San Bernardino and the surrounding Inland Empire communities. We regularly work in Moreno Valley, Riverside, Rialto, Redlands, and Perris. We also service nearby Colton and Highland, so if your property is near the border of San Bernardino, we can still get to you quickly.
Book Your Ghost Controls Service in San Bernardino Today
If your Ghost Controls gate is sluggish, reversing, dead, or just not responding the way it used to, call (844) 614-1023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service is often available. The estimate is free, and the price is agreed before work starts.
Written by Gerardo Hendricks, Owner at Gate Repair Moreno Valley, serving San Bernardino since 2015.